How to connect AirPods: iPhone, iPad, Mac, PC, and more

Affiliate links on SoundGuys may earn us a commission. Learn more.

The Apple AirPods is everywhere—or at least it feels that way. But did you know that these nearly-ubiquitous earbuds can also connect to many more devices than an iPhone or Mac? It might take some additional setup, but if you want to use your AirPods with other phones or even certain video game consoles, it's possible. The AirPods uses Bluetooth for its wireless connectivity, but it also uses Apple's proprietary H1 chip, or H2 in the case of the AirPods Pro (2nd generation). To put it simply, that means devices like the iPhone and iPad support all the features found in the AirPods, and other devices are pretty limited. Still, because it's Bluetooth, basic audio streaming is possible across a range of devices.

Editor's note: this article was updated on January 19, 2023, to add a frequently asked questions section.

Connecting your AirPods to your iPhone is probably the simplest of possible syncing procedures, due to the H1 chip. First, make sure you’re using the latest version of iOS, after that it's easy:

The process for connecting the AirPods to an iPad is pretty similar to connecting to an iPhone. Ensure that the Bluetooth feature is on in the Bluetooth menu of the Settings app, and then follow the same steps as above.

Connecting your AirPods to your Mac is also pretty simple. In fact, if you have everything registered to the same Apple ID, it might be ready to use right away. Click either the Bluetooth or volume control buttons in the menu bar, and if you see your AirPods listed there, it's ready to go and you just need to select it. Don't worry if that's not the case—it's still pretty simple to sync them up:

If sound doesn't play in your earbuds right away, you may need to click on either the volume control or Bluetooth menu in the menu bar and ensure that the AirPods have been set as the output device.

Things get a bit trickier once you venture beyond Apple's computing ecosystem, so connecting your AirPods to a Windows PC might be a bit more involved. Still, it should be relatively straightforward because it’ll show up as a Bluetooth device. To sync AirPods to a PC follow these steps:

Keep in mind you get far fewer features on a PC when using AirPods. There is no Siri access, no automatic switching between devices, and these earbuds only support the SBC and AAC Bluetooth codecs.

We don't recommend using your AirPods with an Android phone for many reasons. Still, if you need to do so in a pinch or it's the only option available, it is possible. Follow these steps to sync up the AirPods with an Android device:

Connecting your AirPods to your Chromebook is basically the same process as any non-Apple device:

Connecting your AirPods to a PlayStation 4 or PlayStation 5 hits a snag because neither supports Bluetooth audio—that might be for the best, though. In fact, it's probably better to use a dedicated gaming headset. Still, if you insist on using your AirPods with a PlayStation 4 or PlayStation 5, you aren't completely out of options. The major caveat is you’ll have to use an external dongle or adapter. We can't vouch for these products as we haven't tested them, but if you’re willing to try them for yourself, you can find a guide here.

Connecting your AirPods to an Xbox is similarly limited. However, there is a workaround that does not require an external adapter. For best results, it involves an iOS device, but you can get it to work with Android (all of its limitations come along for the ride, too, though). Again, we cannot vouch for this procedure nor the use of any external adapters, but if you want to give it a shot, you can find a guide here. Still, it might be easier to just use a dedicated Xbox gaming headset.

The Nintendo Switch is an exception to the rule when it comes to using Bluetooth earbuds like the AirPods with a video game console. That's because the Switch supports Bluetooth audio if you have the latest firmware installed, saving you from purchasing a separate Switch headset.

The steps are inverted from connecting the AirPods to a PC, but other than that it's pretty simple:

Keep in mind, however, that Bluetooth audio may have latency and other problems which could impact your gameplay.

If your Samsung TV has Bluetooth, then it is possible to connect your AirPods to it. However, the earbuds’ functionality will be limited. Different Samsung TV models will vary in the steps required to sync up Bluetooth devices, but in general, it's pretty simple:

If you’re still confused, we have a full guide available that covers connecting your headphones to a TV.

Back in the Apple ecosystem, connecting your AirPods to an Apple TV is also pretty straightforward. When you have your AirPods on the same Apple ID as your Apple TV, it should be ready to go, much like on a Mac. Pressing and holding the "Play" button on your Apple TV will bring up the list of available wireless devices and the AirPods should appear. If that isn't the case for, adding it manually is also quite easy:

Much like many video game consoles, you cannot directly connect your AirPods to a Roku TV. It does not support Bluetooth audio, but also similar to video game consoles, there is a (rather winding) workaround you can try here.

Your AirPods can work as a pair of basic workout earphones with a Peloton bike, but much like with many other devices it will have reduced functionality. The process is pretty similar to other devices as well:

While the AirPods might be designed for and best used with Apple devices, it can connect to other devices as a pair of reduced functionality Bluetooth earbuds. That could come in handy during many scenarios, but keep in mind you may not get an ideal experience.

If the AirPods isn't connecting to any of the above devices, it's likely that your AirPods needs a quick reboot. You can watch the video above to learn how to factory reset your AirPods. Here's our step-by-step guide:

While the AirPods is a popular for its usability, there are plenty of problems that plague it. Fortunately, we have a guide that walks you through how to solve the most common AirPods issues.

If your AirPods aren't connecting to your iOS device automatically, first try putting the AirPods back in the case, closing it, and opening it again to see if it works. If it's still not working, put the AirPods back in the case, close the lid, and wait 15 seconds. Then, open the case and hold the setup button on the back of the case for 10 seconds until the status light on the front of the case flashes white. Hold the AirPods next to your phone with the lid still open and your iOS device should recognize the AirPods.

Firmware updates happen automatically when your AirPods are charging and within range of your iOS device or Mac. If you don't have an iOS, iPadOS, or MacOS device, you won't be able to get firmware updates for your AirPods.